Subnet Services
ROV Simulator System
for a Complete ROV Team
WE are a Supplier Member of IMCA
IN THE FOLLOWING CATEGORY(IES) T2 – TRAINING PROVIDERS OFFERING COURSES APPROVED BY IMCA AREAS OF MEMBERSHIP: REMOTE SYSTEMS & ROV
Subnet have recently built their Purpose Built IMCA Class A – FULL ROV Team Simulator.
The Latest Subnet Services Ltd ROV Simulator is a 4 Man – Team ROV Simulator, built to train and/or assess competency of 1 or ALL ROV Team Members simultaneously.
ROV Supervisor, ROV Pilot, ROV Co Pilot, Rov Data Recorder, 4 x chair desk stations together with Instructor station.
Remote access by client ROV companies any world location allows monitoring of their ROV Teams flying various dive plans.
Team communication, Bridge, Client etc recorded. Scada based data recording with full history of all sensors vehicle telemetry, video stored for all dives as expected offshore. A comprehensive list of features and uses as listed below. A perfect competency training and or competency assessment tool for all and any ROV Team Members Perfect for refreshing Flying Hours needs etc.
Summary of features
Configurable Video Wall
- 4 ROV team member stations side by side. ROV Supervisor, ROV Pilot, ROV Co Pilot and ROV Data Recorder.
- 2 * Monitors for each operator station, fully configurable using stations touch screen (E-F , G-H, I-J))
- 3 Large 55-inch monitor wall (A,B,C)
- 4 x Operator stations each have 2 x additional station monitors. Each station also has touch screen change and selection of any combination. Touch screens also control various variable functions.
- 2 Instructor monitors for observing and fault initiation.
Configurable Operator Stations
- Adjustable, comfortable seats for each operator station
- 2 * Monitors for each operator station, fully configurable using stations touch screen
- Configure all screens to tailor based on dive objective
- Vehicle controller on Pilot Station
- Manipulator controllers on both Pilot and Copilot stations
- TMS Controller on all stations touch screen
- Sonar controls on all stations touch screen
- Communications, both touch to speak and live-to-air channels on all stations
Custom Controller Setup
- Commercial grade controllers
- Industrial ROV controller for vehicle maneuvering on all axis, thruster.
- Tether management Control - Bail in - Bail out
- TOP HAT Depth control
- Instructor Overide
- Manipulator Controllers (5 function and 7 function)
Telemetry Sensors
Vehicle telemetry, displayed on the screen chosen by the operators / students
All vehicle data is logged and recorded to the SUBNET SCADA – time based database system for later viewing for assessment.
Simulated Setup of real environment
- Heading (Digital and Traditional)
- Heading to Objective
- Speed over Ground
- Vehicle Pitch and Roll
- Depth Below Surface
- Depth below transducer
- TMS umbilical tension
- TMS Latch Status
- TMS - Top Hat Depth
- Camera - Pan / Tilt
- Umbilical Turns
- Thruster Gain
- Light power Gain
- Sonar - Range / Width / Direction / Gain
- Attitude (Pitch/Roll)
- Communications Link/channel
- Depth history guage
- High/Low Voltage Status
- Hydraulic Pressure Status
- Vehicle / Lars Power
- LIM / Ingress / Vacuum Fault and status
- DP Status
- SCADA Based System
Cameras
Vehicle Mounted camera control
Vehicle cameras displayed on the monitor of operators choice
- Main Forward facing Camera
- Rear Facing Camera
- Top Facing Camera
- Manipulor mounted Camera
- Deck Camera
Navigation
Sonar and ECGIS charting systems
Vehicle positioning displayed on real-time Electonic Chart Display and information system.
- Sonar
- Vehicle Route Tracking
- Dive Objective Waypoints (Heading to objective)
- Overlay of Subsea structures and their positions
- Search pattern grid tools
- Live satellite GPS status
- Associate positions with each dive log entry
- Marking positions of interest
- Navigational Aids (AIS) nmea
Instructor Control
Scenario's initiated by the instructor or Supervisor / Client
Instructor initiated scenario's.
Initiate various faults for assessing procedure.
- Sonar Faults
- Camera Faults
- Lighting Faults
- Thruster Faults
- Hydraulic Faults
- Electrical Faults / LIM
- Vacuum Faults / Ingress
- TMS Faults
- Weather / Visibility / Current
- Communications Faults / Telemetry
- DP Alarm Status
- General Alarms
- Bridge communication Simulation
- Live remote client interaction
- Adjust vehicle parameters (buoyancy / power)
Remote Monitoring
Live-monitoring for clients
Clients ability to login and remotely monitor operators. Joining in the communications channel.
- Monitor all screens and sensor / telemetry / vehicle camera views
- View Sensor history data for current and previous dives
- Live audio communication with operators
NEW Addition:
Includes FULL REAL T4 Master Controller as used in real ROV Manipulator controls
Come and use it now for your competency assessments or company training in real life scenarios.
Enquiry Form
Please complete the following form and submit for enquiries
Subnet Services Ltd ROV Training and Competence Assessment training@subnetservices.com +639989936381
We are an American Welding Society – AWS accredited welder training and testing center authorized to issue welders international certification to any welding CODE- AWS, ASME, Lloyds, ABS, API, ISO etc.
Welders certified by us are qualified to work in any country.
